Notifications
Clear all

Sending card resolution is 0x0 on vx6s

 
(@codman8489)
会员

We’ve always used the VX4s processors, but we tried using a vx6s recently. However, in LCT Mars under the screen configuration window it says the Sending Card Resolution is 0x0. So if I would try to send the mapping to the screen I get an error message saying “failed to send screen information. The current display is 0px x 0px.” We then tried it with a second laptop and a second vx6s processor and had the same issue. Any thoughts on why this is happening or how to solve it?

引用
Topic starter 已发布 : 21/02/2020 11:11 上午
(@baiqiuxing)
会员 Administrator

Could you pls take a picture to the screen configuration part?

回复引用
已发布 : 21/02/2020 12:44 下午
(@codman8489)
会员

@jeninnovastar-tech

Unfortunately I didn’t take a picture of it while I was on site. I will be back on site in two days and can get one then.

 

回复引用
Topic starter 已发布 : 21/02/2020 1:17 下午
Share: