Notifications
Clear all

Msd300 cascade link

 
(@giobauduin)
会员

Somebody can explain me how connect 2 msd300 sending card in cascade mode and what is for?

 

引用
Topic starter 已发布 : 16/08/2019 3:14 上午
(@giobauduin)
会员

@lsp

I have a msd300.

What is max resolution?

If i cascade two msd300 ,NovaLCT will See one sending card with 650000 pixel for each eth port?thank you for your fast reply.

 

 

 

回复引用
Topic starter 已发布 : 20/08/2019 4:16 下午
(@baiqiuxing)
会员 Administrator

Giobauduin

Hi,you can see the UART port,one is in, the other is out.Then connect this port by the cascade cable.

From the UART OUT of the first card to the UART IN of the second card.

回复引用
已发布 : 21/08/2019 4:39 下午
(@giobauduin)
会员

@jeninnovastar-tech

After the connection uart in e uart out novaLct software will See only one sending card with 4 eth port or two sending card with 2 port ?

 

回复引用
Topic starter 已发布 : 21/08/2019 7:53 下午
Share: