Notifications
Clear all

H.264 stream inputs

 
(@edosullivan)
会员

I have a system using Triple Play encoders and servers to rout rtsp streams to multiple displays, including LED walls.

The current design uses Amino H150 set-top boxes to decode the streams and feed HDMI into quad input cards on Novastar H2 and H5 processors.

Question: Can I eliminate set-top boxes by receiving H.264 streams directly into the H series Ethernet input card, and if so, how many streams at 1080p60? Also, using a third-party controller, can I tell the H5 Ethernet input card to change which stream it’s receiving (give it a new udp address from which to receive the stream?

Thanks.

引用
Topic starter 已发布 : 12/02/2021 3:52 上午
Topic Tags
(@baiqiuxing)
会员 Administrator

Hi:

     The H series support decoding 16x1920x1080@30fps for single card .please check attached.

    

回复引用
已发布 : 19/04/2021 10:37 上午
(@baiqiuxing)
会员 Administrator

Hi:

    Besides,if you want to use third-part controller to change which stream it’s receiving ,You only need to ask our FAE for the central protocol of H series to connect with your third-party equipment.

回复引用
已发布 : 19/04/2021 10:48 上午
Share: