Notifications
Clear all

What equipment is needed

 
(@doncudak)
会员

Hi my name is Don and 10 months ago I was involved in setting up a back to back 66 panel video walls. All the cabinets have a mrv336 reciever and the video processor has a msd300, the wall has been running ok off a cheap laptop, that is now getting problematic,, lol. Anyway asking the experienced forum members what they recommend? Also we would like to perhaps do a quad screen with 3 cable set top boxes? Is that possible? Or split screen in half even at times. I know in sw you can make the boxes and I can choose to stream in one, but how would I get the cable box to display on other side? A video capture card? Can you run 2 or 3 Capture cards in one PC? We are replacing the PC now running the steam and screen, what are you recommendations? The video processor we now have can do a pip. Is there ones that can split more? Lastly when change out PC, what files are need to copy over to new PC to keep the configuration? Tks

Don

引用
Topic starter 已发布 : 21/10/2019 10:49 下午
(@baiqiuxing)
会员 Administrator
 @doncudak
Hi,could you please tell me your country and email address.I’ll let our technical engineer to contact with you.
回复引用
已发布 : 22/10/2019 9:36 上午
(@doncudak)
会员

@jeninnovastar-tech

ok we just put a new PC, a lot faster then the old laptop..lol and added a cheap hdmi quad screen splitter. What we are down to is as follows. The splitter cuts screen in half, so we have TV on one side but with black on top and bottom and the video playing from PC on other side( advertisement paid for by members) we would like to have the right side (advertisement) take the whole half, we played with different resolutions but unable to get full screen and clear( I fell the cheap screen splitter is playing with resolutions) is there a processor we can use that can mix 2 or 3 inputs on to the one screen? Or do we have to add a video Capture card, and use nova studio? This needs to be as simple as possible.. We need for people with no PC skills to be able to just turn it on as it is now, with one two or 3 simple steps. Please advise?? I’m in USA,NY

回复引用
Topic starter 已发布 : 21/01/2020 3:04 上午
(@doncudak)
会员

@jeninnovastar-tech

I would like to email your support, I am not getting emails through to your above name?? Please advise where to send my email address to? Thanks

Don

回复引用
Topic starter 已发布 : 21/01/2020 3:07 上午
(@baiqiuxing)
会员 Administrator

@doncudak

Hi,I’ll let our region technical engineer to contact with you later.You can also send email to support@novastar.tech,the engineer will help you.

回复引用
已发布 : 22/01/2020 12:20 下午
Share: