Notifications
Clear all

Sending card

 
(@mikesh)
会员

How to use 2 sending card in one processor? What is the maximum screens we can configure through 1 sending card?

引用
Topic starter 已发布 : 22/01/2020 6:09 下午
(@baiqiuxing)
会员 Administrator
@mikesh
Thanks for contacting us.
You can cascade the 2 sending card.
Every sending card has different loading capacity,we need to know your screen resolution.
回复引用
已发布 : 22/01/2020 6:26 下午
(@mikesh)
会员

My all cabinet screen receiving card is MRV328. My sending card is msd300. previously there was no problem. nowadays screen flickers time and again during program. even small screen flickers too. could not figure out what is the problem. i have changed lan cable, power cable , lan connector ,…sometimes works and most of the time doesnt. do i need to upgrade my firmware of sending and recieving card? if yes where can i find the firmware? is their any other solution for this? thank you

回复引用
Topic starter 已发布 : 24/03/2021 6:43 下午
(@baiqiuxing)
会员 Administrator

Hi:

    what’s the driver chip and decoding chip  for the module? what’s the current firmware version of te receiving card ?It is best to take a picture of the flickering phenomenon.

回复引用
已发布 : 13/04/2021 10:42 上午
Share: