Notifications
Clear all

Screen using two controllers

 
(@codman8489)
会员

We are building a 12 tile wide by 10 tile high that can’t fit on one controller with redundancy. We will need to split the image onto two controllers, and I would like to split it by putting the top 7 rows on one controller, and the bottom 3 rows on the second controller. How would I need to setup the signal runs, and do I need to connect the two controllers together? What would the screen connection paths look like? I have attached a quick diagram showing a possible configuration that might work. Anything else I would need to do to make this work? Thanks!

引用
Topic starter 已发布 : 10/03/2020 1:12 下午
(@baiqiuxing)
会员 Administrator
@codman8489
Hi,thanks for contacting us.
Could you please tell me the resolution of your screen and cabinet?And what controller are you using?
回复引用
已发布 : 10/03/2020 3:32 下午
(@codman8489)
会员

Hi Jenin,  each 4.8mm tile is 104×104 pixels, for a total resolution of 1248 wide x 1040 tall. We are using VX4S controllers.

回复引用
Topic starter 已发布 : 10/03/2020 10:25 下午
(@baiqiuxing)
会员 Administrator

@codman8489

Ok,could you please tell me where are you from and your email address?I’ll let our region engineer to contact with you.

 

回复引用
已发布 : 11/03/2020 10:10 上午
(@codman8489)
会员

@jeninnovastar-tech That would be great! I live in Minnesota in the United States, and my email is codydbaum@gmail.com

 

回复引用
Topic starter 已发布 : 11/03/2020 11:27 上午
Share: