Notifications
Clear all

Nova Taurus TB3 with WiFi

 
(@mikemedia)
会员

One of our full color displays is running your Nova Taurus TB3 controller with WiFi.

Question.

Our customer wants to display a Microsoft Office Power Point presentation on this display. He wants to be able to manually control when the individual presentation pages change. Is this possible?

If so how would he do this.

引用
Topic starter 已发布 : 04/07/2019 10:31 下午
(@baiqiuxing)
会员 Administrator

I’m sorry you can not!

It’s asynchronous.

回复引用
已发布 : 05/07/2019 12:01 下午
(@mikemedia)
会员

Hi, how about if we change the TB3 for a TB6 which is dual?

回复引用
Topic starter 已发布 : 09/07/2019 3:02 下午
(@ledstech)
会员

Will Totally work with a Tb6

回复引用
已发布 : 10/07/2019 11:36 上午
(@mikemedia)
会员

Sounds good – what software would my customer have to use with the TB6 ?

回复引用
Topic starter 已发布 : 10/07/2019 3:19 下午
(@mikemedia)
会员

One further question – when we installed the TB3 we also installed a synchronous card into the unit – does this not give the TB3 synchronous capability?

回复引用
Topic starter 已发布 : 10/07/2019 3:28 下午
(@baiqiuxing)
会员 Administrator

Software: NovaLCT      Vplex

You can not use a synchronous card in to give the TB3 synchronous capability.These two cards can not be used at the same time.

回复引用
已发布 : 10/07/2019 5:09 下午
(@mikemedia)
会员

OK I understand that the TB3 cannot work.

What I am unclear of is how the TB6 will using ViPlex Express software.

TB6 has WiFi and we will use that to control it.

ViPlex Express seems to only allow files etc to be published to the display – how do you use this to manually start, stop and continue a powerpoint presentation that is displaying on the LED display – do you have to physically stop on the controlling PC and then publish the command?

I see nothing in ViPlex Express that allows real-time interaction with the LED Display. What am I missing here?

回复引用
Topic starter 已发布 : 10/07/2019 10:20 下午
(@michaelfowler)
会员

The only way I know how you could pull this off is as follows:

-Use a TB6
-Disregard the ViPlex Solution entirely.
-Use the HDMI In of the TB6 to connect a PC behind the TB6.
-Connect TB6 output to display via Cat5/6
-Scale to zoom the entire desktop and at this point you are basically using the display as a monitor and you could change slides on command.

Hope this helps.

-MF

回复引用
已发布 : 11/07/2019 2:28 上午
(@ledstech)
会员

Use The Computer connected to the Hdmi connection to do all this Manualy

回复引用
已发布 : 11/07/2019 5:44 上午
(@baiqiuxing)
会员 Administrator

Yes,you are right!

Thank you so much!

回复引用
已发布 : 11/07/2019 9:09 上午
(@mikemedia)
会员

Thank you I appreciate the input from all

回复引用
Topic starter 已发布 : 11/07/2019 3:37 下午
Share: