Notifications
Clear all

MCTRL 4k With light sensor

 
(@vjwerk)
Led tech

Hi all, just please short question:

When I am running one screen from MCTRL4k over 50m optic to CVT and than with 6 main lines and 6 spare line Cat5e.

Sensor is connected on line nr1. before panels on this line.

Question:

Does MCTRL4k is controlling brightness according to sensor values if computer is disconnected or not?

In my case, soon as computer is off, brightness is not changing to values that sensor would give. Since this is one installation next to main road, I get some situations that during night screen burns 100%.

Please reply fast since this problem is really making bad impression.

Thank You

 

引用
Topic starter 已发布 : 14/01/2021 6:27 下午
(@baiqiuxing)
会员 Administrator

Hi:

    You need to  conect the sensor to the multi-function card ,and then set the brightness automatic adjustment in the software to  work.

回复引用
已发布 : 24/01/2021 10:59 上午
Share: