Notifications
Clear all

Combined Screen Resolution

 
(@soundinnovations)
会员

Hi. I’m just getting used with the J6. I’ve combined 3 screens into 1 output. Details as below. I’m using 2 processors (MCTRL600) and the J6 for switching/splicing. Both processors are connected to the J6 via the DVI port.

Main Screen: 7m x 4m (56 panels). 256 x 128 per panel. 4 outputs into the processor. 

Side Screen: 2m x 4m x 2 sides (16 panels per side). 256 x 128 per panel. 1 output per panel into the processor. 

When I connect the VCan software to configure the screen, it automatically changes to 3840 x 1920 resolution regardless even if  I change the resolution manually. My Screen background (grey area) is not accurate as per the screen so when I place my inputs on it, it’s not per scale on the Main LED screen. So I’ve manually moved my inputs to ensure that they are align on screen. Any ideas or maybe I’m doing it wrong? Please help. 

I’m using resolume software for the screen output. 

引用
Topic starter 已发布 : 09/12/2020 6:15 下午
Share: