Hello, I have six cabinets and video does not function. The cabinets power up, but the test button at the rear does not function!!! I have other cabinets that work ok. I have checked the cabling and swaped it out so that is not the problem.
Is it a problem with the receiving card (A4S)? Is it a hardware failure… firmware…
Please HELP 🙂 Thx
Hello.if your receiving card is connected to the sending card or controller .can it display normally?
Requests: Array ( )
Server: Array ( )
© Xi'an NovaStar Tech Co., Ltd. All rights reserved.