Notifications
Clear all

VX6s input video resolution

 
 zee
(@zee)
会员

Hi there, 

I have installed a LED Wall 2816 x 1024 ( 44 x P2.5 @ 3840Hz 640x640mm Cabinets | MRV328).

We do have a VX6s which is doing a great job filling all the pixels. However, the HDMI input is limited to 1080 x 1200, and custom don’t go up.

I was advised that the maximum custom resolution width of HDMI and DVI connectors was 3840 Pixels in direct mode, but the VX6s won’t allow me to customize the HDMI input to 2816 x 1024 to match my output.

Can someone please clarify this and give me an advise? With the current settings 1920 x 1080 it is stretching the output image which is not accurate. 

Thanks in advance for your guidance. 

Best regards, 

Zee Sosa

 

引用
Topic starter 已发布 : 30/07/2021 11:54 下午
(@baiqiuxing)
会员 Administrator

Hi:

     VX6S with over 2.3 million loads cannot support point-to-point unscaled display.The resolution of your current screen cannot be reached by VX6S without scaling.

回复引用
已发布 : 02/08/2021 11:22 上午
Share: