Notifications
Clear all

mrv328 and IC:2055CP+2013EP

 
(@gennadii)
会员

Hello, i need help setting up .
Led module Q2.5AB32V.2.3 IC:2055CP+2013EP don’t work with Receiving Card MRV328.
I used sending card MCTRL300 and latest version NovaLCT.
All hardware was upgraded to latest version firmware from your site.
I tried used MRV336 all is fine working.
Do you have firmware supported my driver chips for mrv328 ?

Thanks.

引用
Topic starter 已发布 : 23/11/2020 5:14 下午
(@baiqiuxing)
会员 Administrator

hi :

   please find the attachment.

回复引用
已发布 : 24/02/2021 5:26 下午
 Bird
(@bird)
会员

Can the MRV328 receiving card send to another MRV328 card in a series or do they have to be individually fed from a sender?

回复引用
已发布 : 18/05/2021 6:27 下午
(@baiqiuxing)
会员 Administrator

Hi:

    You can cascade multiple receiving cards, and upgrade firmware at the same time.

回复引用
已发布 : 09/06/2021 11:07 下午
(@baiqiuxing)
会员 Administrator

Hi:

    You can cascade multiple receiving cards, and upgrade firmware at the same time.

回复引用
已发布 : 09/06/2021 11:07 下午
 fmro
(@fmro)
会员

Hi to all. Been using for a while a few 4G-TB6 with MRV328. We want to monitor LED modules and current/voltage through-out the TV Screens and discovered MON300 cards. Found also the schematics that shows that from each end of every LED module row – a flat cable goes to MON300. A logical link is drawn between MON300 and MRV328, also flatline cable. 

Looking at physical connectors of MRV328 and MON300 seems to be that they not bond. 

Could you confirm that MRV328 and MON300 are compatible or not?

Thank you in advance. 

 

 

回复引用
已发布 : 18/06/2021 10:22 下午
 fmro
(@fmro)
会员

Hi to all. Been using for a while a few 4G-TB6 with MRV328. We want to monitor LED modules and current/voltage through-out the TV Screens and discovered MON300 cards. Found also the schematics that shows that from each end of every LED module row – a flat cable goes to MON300. A logical link is drawn between MON300 and MRV328, also flatline cable. 

Looking at physical connectors of MRV328 and MON300 seems to be that they not bond. 

Could you confirm that MRV328 and MON300 are compatible or not?

Thank you in advance. 

 

 

回复引用
已发布 : 18/06/2021 10:24 下午
(@baiqiuxing)
会员 Administrator

Hi :

    The MRV328 and MON300 is not compatible.  MON300 can only be used with MRV560 comnection.

回复引用
已发布 : 19/06/2021 12:49 下午
(@baiqiuxing)
会员 Administrator

Hi :

    The MRV328 and MON300 is not compatible.  MON300 can only be used with MRV560 comnection.

回复引用
已发布 : 19/06/2021 12:50 下午
Share: